For those who want to replace the screen or other parties, such as the camera or micro-USB port on your Galaxy S6 Edge, you want to know how to disassemble and re-assemble the device
* note - .. disassembly for Galaxy S6 should also be very similar to what
Parts needed:
- Sucker -. You can use this gel cup car mount, you can also use as car holder after
- # 00 screwdriver - This is the standard size screw driver used on most Android smartphones. You can also enter your local hardware store, looking for # 00
- guitar picks or plastic tools -. Take a few guitar picks or plastic tools for Smartphone repair, DO NOT USE METAL TOOLS when removing your phone other than for unscrewing
- hair dryer or a heat gun - I recommend .. heat gun, but you can also use a hair dryer
Step 1. Turn off your S6 Edge and make the nano-SIM try.
Step 2. Use a hot air dryer or hair spray to heat the outer edges of the S6 Edge .
Step 3. Use (or a suction mount car as I did) a suction cup and place it on the rear window of S6 Edge.
Step 4. Repeat steps 2 and 3 until you are able to get a tool or plastic guitar selection trapped between the glass and the rest of the phone on the background of the S6 Edge.
Step 5. Work tool or plastic guitar pick all the way around the phone, be sure to heat up as necessarily using your heat gun or a dryer.
Step 6. Once you drag all the way around the phone, rear glass lid should come off quite easily.
Step 7. Remove all visible screws and there are two hidden screws at the bottom of the phone
HighOnAndroid Facebook Page <- ? - If you like this article, please like our Facebook page here, thx
you want to contact meAdd me on:
GooglePlus
0 komentar