If you accidentally put your S Pen back, you have a problem where your S-Pen is blocked. Now there is a way to solve this problem so just do not try to yank it like that will break your S-Pen detection sensor.
Step 1. Cut a / 2inch (1.3cm) piece of plastic film 1 Note 5 wrapper
Step 2. Cover the S-Pen 270 degrees so that it covers both the sensor side and the S-Pen stand and push the film slowly until you hit bottom. You may need to twist at the end to get all the way through.
(There are two latches, one that holds the S-Pen and also another which is S- Pen detection sensor.)
Step 3. once you hit "down", try moving it back and forth several times (without using too much force!) until you are free of the first flip-flop.
Step 4. Once you are free of the first latch, try moving back and forth without pushing the S-Pen too far back in (as that get lodged on the first lock again) until the S-Pen fate.
Step 5. S-Pen will come out and you should have a fully working Note 5 without breaking your S-Pen detection sensor. Congrats!
Now, this process is actually quite heavy and tedious, and you can always break your sensor if you apply too much force so just be very careful and take a long time .
If your S-Pen breaks detection sensor you can try to take as I did and look for the small broken plastic parts.
HighOnAndroid Facebook Page < --- If you like this article, please like our Facebook page here, thx
you want to contact meAdd me on :?
GooglePlus
0 komentar